NEC Univerge SV8100 Features And Specifications Manual page 1562

Issue 12.0
UC Desktop Applications installed on a 64-bit Windows 7 system support the Desktop

Client, SP310 Soft Phone, Plantronics USB Headset, and UTR-1W-1 USB Handset and
Shared Services (UC Desktop Applications Version 3.7.0.0 or higher software).
UTR-1-1(BK) and UTR-1-1(BK1) handsets, the Enhancement Bundle (Chat, Whiteboard,
Application Sharing, and File Transfer are not supported on 64-bit Windows 7.
When selecting the Desktop Client (Deskset Only) license level in the Desktop

Configuration Wizard with the Shared Services option checked, call control is handled by
the Telephony Service Provider on the Shared Services Server.
The new Voice Message notification by Windows Toast is only supported in Softphone

mode, and not in Desktop mode.
The new Voice Message notification by Windows Toast is only supported with VM8000

InMail. The UM8000 Mail does not support this Voice Message notification in UC Desktop
Applications.
With Version 4000 or higher software, SOAI and 3rd Party CTI can be used at the same

time in the system. This allows systems at Version 4000 or higher to have UC Desktop
Applications and DTPlusware or UCB and DTPlusware.
UC Desktop Applications Version 3.7.0.0 or higher supports systems that have migrated

from the UX5000 to the SV8100 using either UX5000 or SV8100 style telephones.
In systems that have migrated from the UX5000 to the SV8100 and utilize UX5000 phones,

Program 20-02-23 must be set to 1 (UX5000 Special Operation Mode), and Program
20-23-05 must be set to 1 (On).
The Synchronization button within Preferences is available to the license levels shown

below as long as Shared Services is not used:
Desktop Client + Softphone

SP310 – Softphone only

The Synchronization button within Preferences is not available to the Desktop Client

(Deskset only) license level with or without Shared Services.
InMail Integration is not supported in a Centralized VM environment over IP or T1 CCIS.

When using a CS50 USB Headset for soft phone audio device, the Disable CS50 Power

Saving option should be checked in the Desktop Configuration Wizard. This disables the
CS50's power save/sleep mode which is not supported by UC Desktop Suite. Please note
that this will decrease the CS50's battery time.
NAT or NAPT is only supported on the DT700 series phones. NAT or NAPT is not

supported on the ML440, MH240, the Wireless DECT (SIP), SP310 or third party SIP
phones.
If analog Caller ID trunks are being used, Program 14-02-23 must be set to Wait Caller ID

for Salesforce to receive the caller ID for screen pops.
With CO lines, if TAPI is present in the system, there is a designed delay in ringing the

station so TAPI can capture the CID.
2 - 1532
UNIVERGE SV8100
SV8100 UC Desktop Suite Applications