NEC Univerge SV8100 Features And Specifications Manual page 1598

Issue 12.0
Program
Program Name
Number
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
20-09-02 Class of Service Options
(Incoming Call Service) – Caller
ID Display
20-14-01 Class of Service Options for
DISA/E&M – First Digit
Absorbtion (Delete First Digit
Dialed)
20-14-02 Class of Service Options for
DISA/E&M – Trunk Group
Routing/ARS Access
20-14-03 Class of Service Options for
DISA/E&M – Trunk Group
Access
20-14-04 Class of Service Options for
DISA/E&M – Outgoing System
Speed Dial
20-14-05 Class of Service Options for
DISA/E&M – Operator Calling
20-14-06 Class of Service Options for
DISA/E&M – Internal Paging
2 - 1568
Description/Comments
Turn Off or On an extension ability
to receive a second call from a
DID, DISA, DIL, or tie line caller.

With this option set to 1, the
destination extension must
be busy for a second DNIS
caller to ring through. If the
destination extension does
not have a trunk or CAP key
available for the second call
and a previous call is ringing
the extension but has not yet
been answered, the second
caller hears busy regardless
of this program setting.
Turn Off or On the Caller ID
display at an extension.
For Tie Lines, Enable/Disable the
ability to ignore the first incoming
digit. Use this to make the tie trunk
compatible with 3- and 4-digit Tie
Line service. This option does not
apply to DISA.
Enable/Disable a DISA or tie trunk
caller ability to dial 9 for Trunk
Group Routing or Automatic Route
Selection.
Enable/Disable a DISA or tie trunk
caller ability to access trunk
groups for outside calls (Service
Code 704).
Enable/Disable a DISA or tie trunk
caller ability to use System Speed
Dialing.
Enable/Disable a DISA or tie trunk
caller ability to dial 0 for the
telephone system operator.
Enable/Disable a DISA or tie trunk
caller ability to use telephone
system Internal Paging.
T1 Trunking (with ANI/DNIS Compatibility)
UNIVERGE SV8100
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On

(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 =Off
1 = On
(default = 1 for
COS 1~15)
Level
2 3






