NEC Univerge SV8100 Features And Specifications Manual page 1224

Issue 12.0
To park a call at your extension:
1. Press Hold and dial 757.
- OR -
Press Hold and the Personal Park key (Program 15-07 or SC 752:

At a 500/2500 single line telephone, hookflash instead of pressing Hold.

A confirmation tone is heard and the call is parked at your extension. If the extension has a Personal Park key,
the key flashes.

The Personal Park single-digit service code (Program 11-16-11) cannot be used in this operation.
2. Page your co-worker to pick up the call.
3. Press Speaker to hang up (or hang up at the single line telephone).

If not picked up, the call recalls to you.
To park a personal call at your extension after trying to call a co-worker:
1. While on a call, press Transfer/Hold.

Version 4000 or lower or Version 5000 or higher with Program 20-11-26=0 for an extension's Class of Service
required.
2. Dial a co-worker's extension number.

The co-worker does not answer.
3. Press the Personal Park key (Program 15-07 or SC 752:
- OR -
Dial the Personal Park single digit code (Program 11-16-11).

The Intercom call to the co-worker is dropped. A confirmation tone is heard and the outside call is parked at your
extension.

If the co-worker answers the call, the outside call rings back after the intercom call is completed. The call can
then be placed in Personal park if desired.
To Park a personal call at a co-worker's extension after calling them (Version 5000 or higher):

An extension's Class of Service must allow the user to park the call at a co-worker's extension (Program 20-11-26 = 1).
1. While on a call, press Transfer/HOLD.
2. Dial a co-worker's extension number.

The co-worker does not answer.
2 - 1194
UNIVERGE SV8100
07).

07).

Park