NEC Univerge SV8100 Features And Specifications Manual page 1827

UNIVERGE SV8100
Program
Program Name
Number
14-02-10 Analog Trunk Data Setup –
Caller ID
15-02-26 Multiline Telephone Basic Data
Setup – MSG Key Operation
Mode
15-02-28 Multiline Telephone Basic Data
setup – Message Waiting Lamp
Color
15-03-01 Single Line Telephone Basic
Data Setup – SLT Signaling Type
15-03-03 Single Line Telephone Basic
Data Setup – Terminal Type
15-03-09 Single Line Telephone Basic
Data Setup – Caller ID Function –
for External Module
VM8000 InMail
Description/Comments
Enable/Disable a trunk ability to
receive Caller ID information.
Determine whether an extension
MSG key should function as a
Message key or Voice Mail key. If
set as a Message key, the user
can press it to call the voice mail
only when they have new
messages. If set as a Voice Mail
key, it functions as a normal Voice
Mail key (it is not active if
Centralized Voice Mail is used).
Determine whether an extension
Message Waiting Lamp lights
Green or Red when a message is
received.
For each UNIVERGE SV8100
voice mail extension, set this
option to 0.
Enter 1 for this option to allow a
single line port to receive DTMF
tones after the initial call setup.
Enter 0 to have the port ignore
DTMF tones after the initial call
setup. For Voice Mail, always
enter 1 (e.g., receive DTMF
tones).
This option must be 0 when voice
mail is used or the integration
code for the disconnect function is
incorrect.
Assigned Data
1
Trunks 1~200
0 = No

1 = Yes
(default = 0)
0 = Message Key
1 = Voice Mail Key
(default = 0)
0 = Green
1 = Red
(default = 1)
0 = DP
1 = DTMF
(default = 1)
0 = Normal
1 = Special
(default = 0)
0 = Disable
(Off)
1 = Enable
(On)
(default = 0)
Issue 12.0
Level
2 3





2 - 1797