NEC Univerge SV8100 Features And Specifications Manual page 1411

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of the
system to be properly assigned.
Program
Program Name
Number
10-20-01 LAN Setup for External
Equipment – TC Port
41-01-03 System Options for ACD – ACD
MIS Connection Ports
Refer to the SMB8000 E911 Security Notification Application suite installation, setup and ESN
administrator guide for detailed instructions.
SMB8000 Communications Analyst
Description/Comments
When using an IP connection,
define the TCP port used for
communicating to the
CommAnalyst (External Device 5
= SMDR, Entries: 0~65535). This
entry must match the entry made
in the CDM setup with the
CommAnalyst program.
Define what port is used for ACD
MIS connection. Currently only
LAN is supported.
Assigned Data
1
0~65535
default:
External Device 1 (CTI
Server) = 0
External Device 2
(ACD MIS) = 4000
External Device 5
(SMDR Output) = 0
External Device 6 (DIM

Output) = 0
External Device 11
(O&M Server) = 8010
External Device 12
(Traffic Report Output)
= 0
External Device 13
(Room Data Output for
Hotel Service ) = 0
0 = None
3 = LAN

(CD-CP00-US)
(default = 0)
Issue 12.0
Level
2 3
2 - 1381