The power switch is located on the front of the SV8100 chassis to the left hand side. The SV8100 can support up to a total of 4 Chassis. If you have more than one chassis then they must be turned off and on again in a certain order. Please see image below of what the system will look like it if it is a standalone system or if there are multiple chassis.
1. On the top chassis, press the power switch to the off position 2. On the bottom chassis, press the power switch to the off position 3. The system will power down, leave the system powered off if required (Due to electrical work being carried out) 4.
10. The system should be up and operational within 5 minutes.