NEC Univerge SV8100 Features And Specifications Manual page 1613

UNIVERGE SV8100
Program
Program Name
Number
14-01-13 Basic Trunk Data Setup – Trunk-
to-Trunk Transfer
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
20-07-11 Class of Service Options
(Administrator Level) – Forced
Trunk Disconnect (analog trunk
only)
20-11-14 Class of Service Options (Hold/
Transfer Service) –
Trunk-to-Trunk Transfer
Restriction
20-11-21 Class of Service Options (Hold/
Transfer Service) – Restriction
for Tandem Trunking on Hang
Up
20-11-22 Class of Service Options (Hold/
Transfer Service) – Restricted
Unsupervised Conference
20-13-08 Class of Service Options
(Supplementary Service) –
Conference
20-13-10 Class of Service Options
(Supplementary Service) –
Barge-In Monitor
Tandem Trunking (Unsupervised Conference)
Description/Comments
For each trunk that should be able
to participate in a tandem call,
enter 1.
(Optional) Assign a function key
for Transfer (code 06).
Assign a Class of Service (1~15)
to an extension.
Turn Off or On an extension user
ability to use Forced Trunk
Disconnect. This allows the
extension to disconnect an
unsupervised conference in
progress.
Turn Off or On the Trunk-to-Trunk
Transfer Restriction. If enabled,
Trunk-to-Trunk Transfer is not
possible.
Allow/Deny an extension user
ability to set up a tandem call
automatically when they hang up.
Allow/Deny an extension user
ability to initiate an unsupervised
conference.
Turn Off or On extension user
ability to initiate a conference or
Meet Me Conference.
Enable the extension Barge-In
Mode to be speech or Monitor
mode.
Assigned Data
1
0 = Disable

1 = Enable
(default = 1)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Allow
1 = Deny
(default = 0 for
COS 1~15)
0 = Allow
1 = Deny
(default = 0 for
COS 1~15)
0 = Off
1 = On

(default = 1 for
COS 1~15)
0 = Speech
1 = Monitor
(default = 0 for
COS 1~15)
Issue 12.0
Level
2 3






2 - 1583