NEC Univerge SV8100 Features And Specifications Manual page 953

UNIVERGE SV8100
Program
Program Name
Number
16-01-04 Department Group Basic Data
Setup – Hunting Mode
16-01-10 Department Group Basic Data
Setup – Enhanced Hunt Type
16-02-01 Department Group Assignment
for Extensions
84-19-28 SIP Extension CODEC
Information Basic Setup – Audio
Capability Priority
84-19-32 SIP Extension IP CODEC
Information Basic Setup – DTMF
Relay Mode
IVR – Appointment Reminder Server
Description/Comments
This program sets what happens
when an unanswered call to a
Department Group pilot number
reaches the last member of the
group.
If set to (0), once the last
extension is called the hunting
stops.
If set to (1), once the last
extension is called the hunting
continues to search for an idle
member to receive the call.
1 (circular) is recommended
when using a Department Group
for an Appointment Reminder.
Set the type of hunting for each
Extension (Department) Group.
3 (Hunting When Busy or No
Answer) is recommended when
using a Department Group for an
Appointment Reminder.
Use this program to assign all
Appointment Reminder ports to
the Department Group.
Assign the Codec that is to be
used for any 3rd party SIP
stations.
When Appointment Reminder is
installed, this program must be set
to 0 (G.711).
Define the DTMF Relay Mode.
When Appointment Reminder is
installed, this program must be set
to 1 (RFC2833).
Assigned Data
1
0 = Last extension is
called and hunting is
stopped
1 = Circular
(default = 0)
0 = No queuing
1 = Hunting When
Busy
2 = Hunting When Not
Answered
3 = Hunting When
Busy or No Answer
(default = 0)
Department Groups
1~64
Priority 1~999
Default = 1
extensions in

Department Group 1
with priority in port
order:
Port 1 priority = 1
Port 256 priority = 256
0 = G.711_PT
1 = G.723_PT
2 = G.729_PT
3 = G.722
4 = G.726
5 = Not Used
(default = 0)
0 = Disable
1 = RFC2833

(default = 0)
Issue 12.0
Level
2 3



2 - 923