NEC Univerge SV8100 Features And Specifications Manual page 1847

UNIVERGE SV8100
Program
Program Name
Number
47-08-02 Call Routing Mailbox Options –
Screened Transfer Timeout
47-08-03 Call Routing Mailbox Options –
Time Limit for Dialing
Commands
47-08-04 Call Routing Mailbox Options –
Fax Detection
VM8000 InMail
Description/Comments
Set the time a Screened Transfer
(TRF) from the Automated
Attendant rings an unanswered
extension before recalling.
This option has a similar function
as Customize: Mailbox Options:
Call Routing: [Call Handling]
Options: Delay Rings Before
Redirect Transfer in VM8000
InMail.
Determine the time VM8000 InMail
waits for an Automated Attendant
caller to dial before routing the call
to the Timeout destination. Be
sure your Dial Action Tables have
a Timeout action programmed.
If the caller waits too long to dial:
When the associated Dial Action
Table has a Timeout action
programmed, the caller routes to
that destination.
When the associated Dial Action
Table does not have a Timeout
action programmed, the
Instruction Menu repeats three
times and then VM8000 InMail
hangs up.
Enable/Disable Fax detection for
the Call Routing Mailbox. When
Enabled, the VM8000 InMail
Automated Attendant (when using
this mailbox) detects incoming Fax
CNG tone. The Fax then routes to
the company Fax Machine
according to the setting in
Program 47-01-06: Fax Extension.
When Disabled, the Automated
Attendant does not detect
incoming Fax calls.
Assigned Data
1
0~255 (seconds)
Entering 0 causes
immediate recall.
(default = 15)
0~99 (seconds)
Entering 0 causes the
Automated Attendant
to immediately route
callers to the Timeout
destination
programmed in the
active Dial Action
Table.
(default = 5)
0 = Disabled
1 = Enabled
(default = 0)
Issue 12.0
Level
2 3



2 - 1817