NEC Univerge SV8100 Features And Specifications Manual page 1025

UNIVERGE SV8100
Program
Program Name
Number
20-02-23 System Options for Multiline
Telephones – UX5000 Phone
Operation Mode
20-07-10 Class of Service Options
(Administrator Level) –
Programmable Function Key
Programming (Appearance
Level)
22-04-01 Incoming Extension Ring Group
Assignment
22-05-01 Incoming Trunk Ring Group
Assignment
Loop Keys
Description/Comments
Selects the Loop Key operation
like the UX5000 terminal, or the
CAP Key operation like the
SV8100 terminal.
Turn Off or On an extension user
ability to program the Appearance
function keys using Service Code
752.

When programming a feature
as a Programmable Function
Key, refer to Program
15-07-01 in the UNIVERGE
SV8100 Programming
Manual.
Assign extensions (up to 32) to
Ring Groups. Calls ring extensions
according to Ring Group
programming. There are 100
available ring groups.
Assign trunks to incoming Ring
Groups. Use this program to
assign Normal Ring Trunks
(Program 22-02) to Incoming Ring
Groups (Program 22-04).
Assigned Data
1
0 = Original Operation
Mode (CAP Key)
1 = UX5000 Special

Operation Mode (Loop
Key)
(default = 0)
0 = Off
1 = On
(default = 1 for COS
01~15)
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring
for incoming Ring
Group 1 calls. No
other extensions ring
for incoming Ring
Group 1 calls.
Incoming Group
Number for Day/Night
Mode (1~8):
0 (No Setting)
001~100
(Incoming Group)
102 (In-Skin/ External
Voice Mail or VM8000
InMail)
(default = 1)
Issue 12.0
Level
2 3



2 - 995