NEC Univerge SV8100 Features And Specifications Manual page 1272

Issue 12.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
15-07-01 Programmable Function Keys
15-20-01 LCD Line Key Name Assignment
20-06-01 Class of Service for Extensions
2 - 1242
Description/Comments
Assign the functions of a multiline
terminal Programmable Function
Keys. When using Program
15-07-01 to program the function
keys 17~32 on the D16(LD)-R
ADM start with key 17. Service
codes 751 and 752 can also be
used to program these keys.
Define the Line Key Name for line
keys on DESILESS terminals.
Assign Class of Service (1~15) to
extensions.
UNIVERGE SV8100
Assigned Data
1
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
 
00 ~ 99

(Appearance Function
Code) (Service Code
752 by default)
Up to eight digits
Up to 13 characters
Key Number:
01~16 (for 16LD TEL)
17~32 (for 16LD ADM)
Default:
LK01 CO001
: :
LK08 CO008
LK09 All Blank
: :
LK48 All Blank
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
Programmable Function Keys
Level
2 3
