NEC Univerge SV8100 Features And Specifications Manual page 1844

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

Issue 12.0
Program
Program Name
Number
47-06-03
Group Mailbox Subscriber
Options – Auto Erase/Save of
Messages
47-06-04
Group Mailbox Subscriber
Options – Message Retention
47-06-05
Group Mailbox Subscriber
Options – Recording
Conversation Beep
2 - 1814
Description/Comments
Determine what happens when a
Subscriber Mailbox user
completely listens to a new
message and then exits the
mailbox without either saving (SA)
or erasing (E) the message.
Depending on the setting of this
option, VM8000 InMail either
automatically saves or erases the
message. If the mailbox user
hangs up before listening to the
entire new message, VM8000
InMail retains the message as a
new message.
Determine how long a Subscriber
Mailbox retains held and saved
messages. If a message is left in a
Subscriber Mailbox longer than
this interval, VM8000 InMail
deletes it.
Enable/Disable the Conversation
Record beep. If enabled, all
parties on a call hear the voice
prompt Recording followed by a
single beep when the extension
user initiates Conversation
Record. If disabled, the voice
prompt and beep do not occur.
When you disable the
Conversation Record beep, the
following voice prompts do not
occur while VM8000 InMail
records the conversation:
Recording (followed by a beep)
That mailbox is full (if the mailbox
message storage capacity is
reached).
You have reached the recording
limit (if the recorded message is
too long).
The SV8100 telephone system
software provides an additional
Conversation Record beep. This
beep repeats according to the
setting of Program 45-01-06:
Voice Mail Integration Options:
Record Alert Tone Interval Time.
UNIVERGE SV8100
Assigned Data
1
0 = Erase
After the subscriber
listens to the entire
new message and
hangs up, VM8000
InMail erases the
message.
1 = Save
After the subscriber
listens to the entire
new message and
hangs up, VM8000
InMail saves the
message.
(default = 1)
1~90 days
0 (Indefinite)
(default = 0)
0 = No (Disable)
1 = Yes (Enable)
(default = 1)
VM8000 InMail
Level
2
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents