NEC Univerge SV8100 Features And Specifications Manual page 1404

Issue 12.0
Program
Program Name
Number
35-01-02 SMDR Options – Output
Destination Number
35-01-03 SMDR Options – Header
Language
35-01-04 SMDR Options – Omit Digits
35-01-05 SMDR Options – Minimum Digits
35-01-06 SMDR Options – Minimum Call
Duration
35-01-07 SMDR Options – Minimum Ring
Time (For Incoming Calls)
35-01-08 SMDR Options – Format
Selection
35-02-01 SMDR Output Options – Toll
Restricted Call
35-02-02 SMDR Output Options – PBX
Calls
35-02-03 SMDR Output Options – Trunk
Number or Name
35-02-04 SMDR Output Options –
Summary (Daily)
2 - 1374
Description/Comments
Specify the SMDR printer output
extension (CTA extension
number).
Specify the language used to print
the SMDR header.
The number of digits entered for
this option do not print on the
SMDR Report (0~24). For
example, if the entry is 10, the last
10 digits a user dials do not
appear on the SMDR report.
Outgoing calls must have at least
this number of digits for inclusion
in the SMDR report (0~24).
A call must last at least this time to
be included in the SMDR report.
A call must ring for at least this
time to be included in the SMDR
report.
Set the SMDR (Station Message
Detail Recording) format for each
of the eight SMDR ports.
Determine if SMDR can include or
exclude calls blocked by Toll
Restriction.
When the system is behind a PBX,
SMDR can include all calls (1) or
just calls dialed using the PBX
trunk access code (0).
Select whether the system should
display the trunk Name or Number
on SMDR reports.

If this option is set to 0,
Program 35-02-14 must be
set to 0.
Set this option to 1 to have the
SMDR report provide a daily
summary (at midnight every night).
UNIVERGE SV8100
Assigned Data
Up to eight digits
(default not assigned)
0 = English
1 = German
2 = French
3 = Italian
4 = Spanish
(default = 0)
0~24
(0 = Not applied)
(default = 0)
0~24
(0 = Not applied)
(default = 0)
0~65535 (seconds)
(0 = All)
(default = 0)
0~65535 (seconds)
(0 = All)
(default = 0)
0 = NA Type (North
America)
1 = G/J Type
(Overseas/ Japan)
(default = 0)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Name
1 = Number
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
SMB8000 Communications Analyst
Level
1 2 3










