Personal Park At A Co-Worker's Extension - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Personal Park at a Co-Worker's Extension

The Personal Park feature allows an extension user to place an outside call, which is on hold, on

Personal Park at a co-worker's extension after placing an intercom call. This feature is available for

keysets, SLTs, IP terminals and IP DECT terminals.

If an internal call forwards before Personal Park on a Co-Worker's Extension is performed,

the call is Parked in the originator's Personal Park orbit.

This feature is not available when calling a Department Group's pilot number.

If an extension user has a call in Personal Park and the terminal is unplugged, the Personal

Park is cancelled and the held caller hears a busy tone.

This feature does not work when calling a Networked or virtual extension.

If an extension already has a call in their Personal Park Orbit, the Personal Park for a

Co-Worker's Extension will not work until the first call is retrieved from Park.

A Personal Park Programmable Function Key or the Soft Key must be used to park the call

in a co-worker's park. This operation cannot be done using a service code.

An extension can park a call in any Park Orbit. However, an extension can only pick up a

call Parked by a member of its own Park group (see Program 24-03).

If an extension is not allowed access to trunks in the Access Maps (Program 14-07 and

Program 15-06), calls in Park and on Hold can be blocked.

Default Setting

System Availability

All Terminals

Show Quick Links

Table of Contents