NEC Univerge SV8100 Features And Specifications Manual page 1810

Issue 12.0
Program
Program Name
Number
15-18-04 Virtual Extension Key Enhanced
Options – Show Internal Caller
Information
15-18-05 Virtual Extension Key Enhanced
Options – One Ring
15-25-01 DESI-less Page Setup –
Incoming Call Notify Event
15-25-02 DESI-less Page Setup –
Incoming Call Automatic Screen
Switching
15-25-03 DESI-less Page Setup – Idle
Automatic Screen Switching
15-25-04 DESI-less Page Setup – Answer
Automatic Screen Switching
20-02-19 System Options for Multiline
Telephones – Virtual Extension
Mode
20-04-03 System Options for Virtual
Extensions – CAR/SIE/Virtual
Extension Delay Interval
20-04-05 System Options for Virtual
Extensions – Ringtone Mode for
Incoming to Virtual Extension
2 - 1780
Description/Comments
When set to a 0, internal calls to
the virtual extension will not show
the name or number of the
extension that is calling.
When set to 1, internal calls to the
virtual extension WILL show the
name or number of the extension
that is calling if the virtual is
assigned to ring or if Program
15-18-03 is set to a 1.
When set to a 0, the virtual
extension follows the normal ring
cycle.
When set to a 1, the virtual
extension will only ring one time
(the virtual extension must be first
set to ring in Program 15-08).
Enable/Disable the ability of a
DESI-Less terminal to blink the
page number that has an incoming
call on one of the keys.
Enable/Disable the ability of a
DESI-Less terminal to switch to
the page that has an incoming call
on one of the keys.
Define or Disable the page to be
automatically displayed when a
DESI-Less terminal becomes idle.
Define or Disable the page to be
automatically displayed when a
DESI-Less terminal answers a
call.
Set the mode of a virtual extension
key that appears on a DSS
console.
CAR Keys/SIE Keys/Virtual
Extensions set for Delayed
Ringing (see Program 15-11) ring
the extension after this time.
Assign distinctive ringtone to
incoming Virtual extension.
UNIVERGE SV8100
Assigned Data
1
0 = Do not show
1 = Show
(default = 0)
0 = Normal Ring Cycle
1 = One Ring
(default = 0)
0 = Disable
1 = Enable

(default = 1)
0 = Disable
1 = Enable

(default = 1)
0 = Disable
1 = Display page 1
2 = Display page 2

3 = Display page 3
4 = Display page 4
(default = 0)
0 = Disable
1 = Display page 1
2 = Display page 2

3 = Display page 3
4 = Display page 4
(default = 0)
0 = No
1 = Yes
(default = 0)
0~64800 (seconds)
(default = 10)
0 = Off
1 = On
(default = 0)
Virtual Extensions
Level
2 3




