NEC Univerge SV8100 Features And Specifications Manual page 1265

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
14-01-09 Basic Trunk Data Setup – Private
Line
Private Line
Description/Comments
Determine if a trunk should be
used as a Normal or Private line.

A Private Line reserves a
trunk for a multiline terminal
for placing and answering
calls. A user with a Private
Line always knows when
important calls are for them.
Additionally, the user has
their own trunk for placing
calls that is not available to
others in the system.
Assigned Data
1
0 = Disable Private
Line (Normal)
1 = Enable Private Line
(Private Line)
(default = 0)

Issue 12.0
Level
2 3
2 - 1235