NEC Univerge SV8100 Features And Specifications Manual page 1170

Issue 12.0
Program
Program Name
Number
20-06-01 Class of Service for Extensions
20-07-01 Class of Service Options
(Administrator Level) – Manual
Night Service Enabled
20-10-07 Class of Service Options
(Answer Service) – Automatic
Off-Hook Answer
22-02-01 Incoming Call Trunk Setup
22-04-01 Incoming Extension Ring Group
Assignment
2 - 1140
Description/Comments
Assign a Class of Service (1~15)
to an extension.
Turn Off or On an extension user
ability to manually Switch the
Night Mode (Service Code 718).
This option must be enabled for an
extension to display the Night
indication.
Turn Off or On an extension user
ability to use Universal Auto
Answer (no service code
required).
Assign the incoming trunk type for
each trunk. There is one item for
each Night Service Mode (1~8).
To have trunks ring extensions
during the different Night Service
modes (for ANA), assign
extensions to Ring Groups. For
each extension in the Ring Groups
(1~100), indicate in Program
22-06-01 if trunk should Ring (1)
or Not Ring (0).
UNIVERGE SV8100
Assigned Data
1
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Normal
1 = VRS (second dial
tone if no VRS
installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring

for incoming Ring
Group 1 calls. No
other extensions ring
for incoming Ring
Group 1 calls.
Night Service
Level
2 3


