NEC Univerge SV8100 Features And Specifications Manual page 1247

UNIVERGE SV8100
Program
Program Name
Number
90-02-03 Programming Password Setup –
User Level
90-26-01 Program Access Level Setup –
Maintenance Level
90-28-01 User Programming Password
Setup – Password
Outbound IP Connection:
Program
Program Name
Number
10-03-01 ETU Setup
PC Programming
Description/Comments
Set the system password user
levels.
Define access levels to each
program. This program defines
which administrator accounts in
Program 90-02 can access the
program. If a program is not
accessible, it does not appear in
PCPro/WebPro.
Use to set the password to enter
the user programming mode.
Description/Comments
Set up and confirm the basic
configuration data for each blade.
This program represents different
data depending on the blade
installed in the slot. Refer to the
SV8100 Programming Manual for
a more detailed description of this
program.
Assigned Data
1
0 = Prohibited User
1 = MF (Manufacturer
Level)
2 = IN (Installer Level)
3 = SA (System
Administrator Level 1)
4 = SB (System
Administrator Level 2)
5 = UA (User
Programming Level 1)
Refer to the SV8100
Programming Manual
for default settings.
1 = MF Level
2 = IN Level
3 = SA Level
4 = SB Level
Default:
Refer to the Level
indication for each
individual program
(located in the upper
left corner at the
beginning of each
program).
Up to eight digits
Fixed four digits
(default = 1111)
Assigned Data
1
The assigned data
varies depending on
the blade installed in
the slot. Please refer
to the SV8100
Programming Manual
for a more detailed
description of the
10-03-XX programs.
Issue 12.0
Level
2 3



Level
2 3

2 - 1217