Table 2-129 Error Messages And Causes - NEC Univerge SV8100 Features And Specifications Manual

Issue 12.0
Program
Program Name
Number
90-02-02 Programming Password Setup –
Password
90-02-03 Programming Password Setup –
User Level
Troubleshooting
The table below shows possible Error messages and Causes:
Error Message
VMDB is not attached
Mailbox XXX does not exist.
(XXX = mailbox number)
The mailbox is being used by another
session
There is no available space in the CF.
The file is being used by another session.
Please try again later.
The selected file has already been deleted.
2 - 1848
Description/Comments
Configure the administrator
accounts that are used when
connecting to the KTS via PCPro/
WebPro.
If using PCPro, these are the
accounts that are used to connect.
If using WebPro, these are the
accounts that are used to login.

If calls are answered by an
Auto attendant first, instead
of the DIL setup on Program
22-01 and Program 22-07,
set the transfer destination in
the Auto Attendant to the
Modem Access Service
Code.
Set the system password user
levels.

Table 2-129 Error Messages and Causes

The PZ-VM21 is not attached.
The mailbox does not exist
When the mailbox is being used by another session, either PC or
telephone.
When there is no available space in the CF.
When the file to be downloaded is being used by another
session, either PC or telephone.
When the file selected for download has already been deleted.
UNIVERGE SV8100
Assigned Data
Up to eight digits.
Refer to the SV8100
Programming Manual
for default settings.
0 = Prohibited User
1 = MF (Manufacturer
Level)
2 = IN (Installer Level)
3 = SA (System
Administrator Level 1)
4 = SB (System
Administrator Level 2)
5 = UA (User
Programming Level 1)
Refer to the SV8100
Programming Manual
for default settings.
Cause
VM8000 InMail Upload Download Audio
Level
1 2 3

