Table 2-106 Tapi Commands - NEC Univerge SV8100 Features And Specifications Manual

Issue 12.0
Refer to

The TAPI Compatibility feature does not support CAP keys 1000~9999. Only 0001~0999

can be supported.
With Version 4000 or higher software, SOAI and 3rd Party CTI can be used at the same

time in the system. This allows systems at Version 4000 or higher to have Desktop
Applications and DTPlusware or UCB and DTPlusware.
lineAddProvider
lineConfigDialog
lineGetAddressCaps
lineGetDevCaps
lineGetDevConfig
lineGetIcon
lineGetID
lineInitializeEx
lineNegotiateAPIVersion
lineNegotiateExtVersion
lineRemoveProvider
lineSetDevConfig
lineShutdown
lineClose
lineDeallocateCall
lineGetAddressStatus
lineGetCallInfo
lineGetCallStatus
lineGetLineDevStatus
lineOpen
lineSetAppSpecific
lineSetLineDevStatus
lineSetMediaMode
lineSetStatusMessages
lineMonitorDigits
When SOAI (Simplified OAI, used by DT Plusware) and 3rd Party TAPI (i.e. Desktop

Applications Shared Services) are used in the same system, the following limitations apply
to only the SOAI application.
Multiple Call Handling (Operator Terminal, Call Queueing, etc.) is not supported for extensions

controlled by SOAI.
SOAI controlled extensions cannot be the destination for Call Forward Both Ring or Tandem

Ringing.
SOAI controlled extensions cannot have direct CO line keys (752: *01).

SOAI controlled extensions do not support Park Holding.

2 - 1598

Table 2-106 TAPI Commands

Table 2-106 TAPI Commands
for a list of supported TAPI commands.
lineAnswer
lineBlindTransfer
lineCompleteCall
lineCompleteTransfer
lineDevSpecific
lineDial
lineDrop
lineForward
lineHold
lineMakeCall
linePark
linePickup
linePrepareAddToConference
lineRedirect
lineRemoveFromConference
lineSetupConference
lineSetupTransfer
lineSwapHold
lineUncompleteCall
lineUnhold
lineUnpark
lineGatherDigits
lineGenerateDigits
lineGenerateTone
UNIVERGE SV8100
TAPI Compatibility