NEC Univerge SV8100 Features And Specifications Manual page 888

Issue 12.0
Program
Program Name
Number
10-12-11 CD-CP00-US Network Setup –
NIC Setup
10-23-01 SIP System Interconnection
Setup – System Interconnection
10-23-02 SIP System Interconnection
Setup – IP Address
10-23-04 SIP System Interconnection
Setup – Dial Number
10-26-03 IP System Operation Setup – SIP
Peer to Peer Mode
10-28-04 SIP System Information Setup –
User ID
10-40-01 IP Trunk Availability – IP Trunk
Availability
10-40-02 IP Trunk Availability – Number of
Ports
2 - 858
Description/Comments
Define the LAN interface Speed
and Mode of the VoIP Application
supported.

IPLB daughter board does
not support half duplex
connection.
Determine if the system is
interconnected to another system.

For the SIP System
Interconnection set to
1 (Yes).
Define the IP Address for the SIP
System Interconnection.
Define the Dial Number for the SIP
System.
Enable/Disable the Peer to Peer
feature for SIP IP stations.

For Video Call to function set
to 1 (On).
Define the User ID.
An entry is required for SIP
System Interconnection to
function.
Enable/Disable IP Trunks.

For the SIP System
Interconnection set to
1 (Enable).
Define the number of IP Trunks
when enabled.
IP Trunk – (SIP) Session Initiation Protocol
UNIVERGE SV8100
Assigned Data
1
0 = Auto Detect
1 = 100Mbps, Full
Duplex
2 = 100Mbps, Half
Duplex
3 = 10Mbps, Full

Duplex
4 = 10Mbps, Half
Duplex
5 = 1Gbps, Full Duplex
6 = 1Gbps, Half Duplex
(default = 0)
0 = No (Disable)
1 = Yes (Enable)

(default = 0)
0.0.0.0~
126.255.255.254
128.0.0.1~

191.255.255.254
192.0.0.1~
223.255.255.254
(default = 0.0.0.0)
Up to 12 digits (0~9)

(default not assigned)
0 = Off
1 = On

(default = 1)
Up to 32 Characters
When assigning the
User ID, the ID may
contain only alpha
characters. (A space

and/or special
characters are not
allowed in the User ID
field).
(default not assigned)
0 = Disable
1 = Enable

(default = 0)
0~128

(default = 0)
Level
2 3