NEC Univerge SV8100 Features And Specifications Manual page 1607

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-11-41 Service Code Setup (for Setup/
Entry Operation) – Tandem
Ringing
15-07-01 Programmable Function Keys
30-03-01 DSS Console Key Assignment
Operation
To set up Tandem Ringing:
1. Press Speaker at the extension considered to be the master telephone (optional).
2. Press the Tandem Ringing key (Program 15-07 or SC 751: 80).
3. Dial 1 to set the feature.
Tandem Ringing
Description/Comments
Define a service code to be used
to set up Tandem Ringing.
Assign a function key for Tandem
Ringing (code 80).
Assign a DSS function key for
Tandem Ringing (code 80).
Assigned Data
1
MLT, SLT
(default not assigned)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Key Number
001~500
0~99 (General
Functional Level)
97 = Door Box Access
key (additional data:
1~8 Door Box No.)
00 ~ 99
 
(Appearance
Functional Level)
Issue 12.0
Level
2 3



2 - 1577