NEC Univerge SV8100 Features And Specifications Manual page 1714

Issue 12.0
Program
Program Name
Number
14-01-22 Basic Trunk Data Setup – Caller
ID to Voice Mail
14-02-10 Analog Trunk Data Setup –
Caller ID
15-02-08 Multiline Telephone Basic Data
Setup – Automatic Handsfree
15-02-26 Multiline Telephone Basic Data
Setup – MSG Key Operation
Mode
15-02-28 Multiline Telephone Basic Data
Setup – Message Waiting Lamp
Color
15-02-37 Multiline Telephone Basic Data
Setup – Voice Mail Message Wait
Lamp Color
15-02-38 Multiline Telephone Basic Data
Setup – Voice Mail Message Wait
Lamp Cycle
15-03-01 Single Line Telephone Basic
Data Setup – SLT Signaling Type
15-03-03 Single Line Telephone Basic
Data Setup – Terminal Type
2 - 1684
Description/Comments
Enable/Disable the system ability
to send the Caller ID digits to voice
mail.
Enable/Disable a trunk user ability
to receive Caller ID information.
Set whether pressing a key
accesses a One-Touch Key or
preselects the key.
Determine whether an extension
MSG key should function as a
Message key or Voice Mail key. If
set as a Message key, users can
press the key to call the voice mail
only when they have new
messages.
Determine whether an extension
Message Waiting Lamp lights
Green or Red when a message is
received.
Set up various message wait lamp
cycle options for lamp color.
Select the cycle method that the
Large LED flashes when the
extension has a VM Message
Waiting set to the extension.
For each UNIVERGE SV8100
voice mail extension, set this
option to 1.
Enter 1 for this option to allow a
single line port to receive DTMF
tones after the initial call setup.
Enter 0 to have the port ignore
DTMF tones after the initial call
setup. For Voice Mail, always
enter 1 (e.g., receive DTMF
tones).
UNIVERGE SV8100
Assigned Data
1
Trunks 1~200
0 = Disable

1 = Enable
(default = 0)
Trunks 1~200
0 = No

1 = Yes
(default = 0)
0 = Preselect
1 = One-Touch
(Automatic Handsfree)
(default = 1)
0 = Message Key
1 = Voice Mail Key
(default = 0)
0 = Green
1 = Red
(default = 1)
0 = Green
1 = Red
(default = 1)
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
(default = 3)
0 = DP
1 = DTMF
(default = 1)
0 = Normal
1 = Special
(default = 0)

UM8000 Mail
Level
2 3





