NEC Univerge SV8100 Features And Specifications Manual page 1530

Issue 12.0
Program
Program Name
Number
51-01-03 NetLink System Property Setting
– Secondary System Flag
51-01-04 NetLink System Property Setting
– Signal Transmit Method
51-02-01 NetLink System Individual
Setting – System Name
51-02-02 NetLink System Individual
Setting – Time Zone (Hour)
51-02-04 NetLink System Individual
Setting – Authenticate System
MAC Address
2 - 1500
Description/Comments
If set to 0, NetLink is dynamically
established based on Node List in
Program 51-03-01. Primary
System is selected in the order the
system wakes up.
If set to 1, the system connects
with Top Priority Primary System.
If Top Priority Primary System is
not found, the system searches
Primary System like this is set to 0.
0 = Immediate
This default setting does not use
the Nagle Algorithm. When
enabled, data packets are
immediately sent across the
network with no buffering delay.
1 = Buffering
Nagle Algorithm enabled. Small
data packets are not transmitted
immediately across the network.
The smaller data packets will be
buffered and then sent across as
larger data packets decreasing the
number of packets sent across the
network. When the number of
packets sent across the network
decreases, the amount of
bandwidth also decreases.
Enter the name given to each
system.
Determine the time offset from the
Primary system.
(0 = -12, 1 = -11, 2 = -10.... 24 =
+12)
This setting affects Time Display
on MLT (see 51-13-02).
Set Program 51-13-03 to 1
(enable). NetLink systems reject
the connection from
unauthenticated system access.
UNIVERGE SV8100
Assigned Data
1
0 = Disable
1 = Enable
(default = 0)

0 = Immediate
1 = Buffering
(default = 0)

Version 8000 or
lower
default = 0

Version 9000 or
higher
default = 1
Up to 20 characters.
(default not assigned)
0~24
(default = 12)
00-00-00-00-00-00~
FF-FF-FF-FF-FF-FF
(default =
00-00-00-00-00-00)
SV8100 NetLink
Level
2 3



