NEC Univerge SV8100 Features And Specifications Manual page 1465

UNIVERGE SV8100
3. Dial the Group Speed Dialing code.

The stored number dials out.

Unless you preselect, Trunk Group Routing selects the trunk for the call.

If you have a DSS Console, you may be able to press a DSS Console key to chain to a stored number.
To check your stored Speed Dialing numbers (display telephone only):
1. Press the Help key.
2. For System Speed Dialing, press Redial.
Dial the Speed Dialing Code (e.g., common code 001).

If the entire stored number is too long for your telephone display, press
- OR -
For Group Speed Dialing, press the Group Speed Dialing key.
- OR -
For System Speed Dialing key, press the System Speed Dialing key.
3. Press the Exit key.

To display additional numbers, repeat from step 1.
- OR -
Press the Right Cursor key until the appropriate Telephone Book, System or Group Speed Dial
menu appears.

Use the Volume "Down" and Volume "Up" keys to scroll through the stored numbers.
To store a Station Speed Dialing number (display telephones only):
1. Press Speaker.
2. Dial 755.
3. Dial the Station Speed Dial buffer number to be programmed (0~9).
1 = Station Speed Dial buffer 1
2 = Station Speed Dial buffer 2
" " "
0 = Station Speed Dial buffer 10
4. Dial the telephone number you want to store (up to 24 digits).
 Valid entries are 0~9, # and
5. Press Hold.
Speed Dial – System/Group/Station
" " "
 . To enter a pause, press MIC. To store a Flash, press Recall.
 to see the rest of the number.
Issue 12.0
2 - 1435