NEC Univerge SV8100 Features And Specifications Manual page 1861

UNIVERGE SV8100
Personal Answering Machine Emulation (Multiline Terminal Only):
To enable or cancel Personal Answering Machine Emulation:
1. Press Speaker (or lift the handset at the single line telephone) and choose from the following dial
access codes:
741 = Call Forward – Immediate
742 = Call Forward – Busy
743 = Call Forward – No Answer
744 = Call Forward – Busy/No Answer
745 = Call Forward – Both Ring
746 = Call Forwarding – Follow Me
2. Dial the Voice Mail master number.
3. Press Speaker to hang up (or hang up handset at the single line telephone).
When Personal Answering Machine Emulation broadcasts your caller's message, you can:
Your telephone must be idle (not on a call).
1. Do nothing.

The message is automatically being recorded in your mailbox. The broadcast stops when your caller hangs up.
- OR -
1. Lift the handset to intercept the call.

You connect to the caller. The system records the first part of the message in your mailbox. The line key changes
from red to green.
- OR -
Press Speaker to cut off the message broadcast and send the call to your mailbox.

Voice Mail records the entire message in your mailbox.
Checking Your Messages (Multiline Terminal Only):
To check your messages:
1. Press the Message key.
VM8000 InMail
Issue 12.0
2 - 1831