NEC Univerge SV8100 Features And Specifications Manual page 969

UNIVERGE SV8100
Default Setting
Enabled
System Availability
Terminals
None
Required Component(s)
CD-CP00-US with PZ-32/64/128IPLA or PZ-32/64/128IPLB Daughter Board
Related Features
K-CCIS – IP
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Refer to the UNIVERGE SV8100 Networking Manual for programming details.
Program
Program Name
Number
10-26-04 IP System Operation Setup –
DT700 Peer to Peer Mode
K-CCIS – IP
Description/Comments
Use to Enable (1) or Disable (0)
the Peer to Peer feature for SIP
MLT and SIP IP stations.
Assigned Data
1
0 = Off
1 = On
(default = 1)
Issue 12.0
Level
2 3

2 - 939