NEC Univerge SV8100 Features And Specifications Manual page 1493

UNIVERGE SV8100
OUTGOING CALL/COST SUMMARY
FOR MONTH ENDING nn/nn/nn
TOTAL NO. OF OUTGOING PSTN CALLS: 49
TOTAL NO. OF OUTGOING ISDN CALLS: 0
NO. OF OUTGOING PSTN CALLS COSTED: 0 COST: 0
NO. OF OUTGOING ISDN CALLS COSTED: 0 COST: 0
Conditions
SMDR data does not include internal calls Version 6000 (V6.02 or lower).

With Version 7000 or higher software, SMDR can record/print both system trunk and

internal calls. Version 7000 Enhancement License (0036) and SMDR Feature License
(0008) is required.
With Version 7000 or lower, the SMDR call buffer stores 320 calls. The buffer stores calls

when the SMDR device is unavailable. When the buffer fills, SMDR will not collect any new
calls until the buffer is cleared.
With Version 8000 or higher software and the PZ-ME50-US installed, the SV8100 can

buffer up to 4000 calls. The Version 8000 Enhancement License (0037) and SMDR
Feature License (0008) is required.
When SMDR reports are enabled using the same port as the Traffic Reporting feature

(example: 147), the SMDR blocks the Traffic reports. Unplug the cable and plug it back in to
allow Traffic reports to print.
SMDR requires a connection to the CD-CP00-US LAN, or a RS232 serial connection to a

CT(A)-R adaptor on a DTH/DTR style phone.
When using a CT(A)-R unit connected to a DTH/DTR style terminal for SMDR output:

SW1-1 and SW1-2 should be set to ON and SW1-3 ~SW1-8 set to OFF on the CT(A) unit

The CT(A)-R unit should be connected to the DTH/DTR terminal and connected to power

before the line cord is plugged in
DT300 and DT700 style terminals do not support a RS232 serial connection for SMDR

output.
If no answer is received, NO ANSWER is displayed regardless of the system programing

for the Caller ID display option (Trunk only).
The setting in Program 35-02-18 works regardless of the entry in Program 35-02-15 or

35-02-17.
When Program 35-02-18 is set to 1, the first and second lines are sometimes separated.

When the buffer is full, the overflowed data may not be shown.
Station Message Detail Recording
Table 2-85 SMDR Summary Report (Continued)
Issue 12.0
2 - 1463