NEC Univerge SV8100 Features And Specifications Manual page 1034

Issue 12.0
Meet Me Paging Transfer
Paging, External
Paging, Internal
Programmable Function Keys
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-12-21 Service Code Setup (for Service
Access) – Meet-Me Answer to
Specified Internal Paging Group
11-12-22 Service Code Setup (for Service
Access) – Meet-Me Answer to
External Paging
11-12-23 Service Code Setup (for Service
Access) – Meet-Me Answer in
Same Paging Group
15-07-01 Programmable Function Keys
2 - 1004
Description/Comments
Customize the Service Codes
used for meet-me answer to
specified internal paging group
service access.
Customize the Service Codes
used for meet-me answer to
external paging service access.
Customize the Service
Codes used for meet-me answer
in same paging group service
access.
Assign function keys for External
Zone Paging (code 19 + zone),
External All Call Paging (code 20),
Internal Zone Paging (code 21 +
zone) or Meet Me Conference/
Paging Pickup (code 23).
UNIVERGE SV8100
Assigned Data
1
MLT, SLT
(default = 764)
MLT, SLT
(default = 765)
MLT, SLT
(default = 763)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Meet Me Paging
Level
2 3


