NEC Univerge SV8100 Features And Specifications Manual page 1774

Issue 12.0
Program
Program Name
Number
16-03-01 Secondary Department Group
20-06-01 Class of Service for Extensions
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
20-11-17 Class of Service Options (Hold/
Transfer Service) – Department
Group Trunk-to-Trunk Transfer
(Each Telephone Group
Transfer)
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
20-13-14 Class of Service Options
(Supplementary Service) –
Department Calling (PLT No
Called Extension)
22-02-01 Incoming Call Trunk Setup
2 - 1744
Description/Comments
Assign extensions to multiple
Department Groups and set the
priority assignment. Each
Secondary Department Group can
have up to 16 extensions
assigned.
Assign a Class of Service (1~15)
to an extension.
Turn Off or On an extension user
ability to have calls queued if a call
rings the extension when it is
busy.
Turn Off or On an extension user
ability in a Department Group to
use the Trunk-to-Trunk
Forwarding service codes.
Allow a busy extension to
Manually (0) or Automatically (1)
receive off-hook Signals.
Turn Off or On an extension user
ability to call a Department Group
Pilot.
If you want a trunk to be a DIL to a
Department Group, assign Service
Type 4 for each Night Service
Mode. Also see Program
22-07-01.
UNIVERGE SV8100
Assigned Data
1
Extension Number
Maximum eight digits
Priority Order
0~999
(default not assigned)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Normal
1 = VRS (second dial
tone if no VRS
installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Uniform Call Distribution (UCD)
Level
2 3






