NEC Univerge SV8100 Features And Specifications Manual page 1266

Issue 12.0
Program
Program Name
Number
14-07-01 Trunk Access Map Setup – Trunk
Port Number
15-06-01 Trunk Access Map for
Extensions
15-07-01 Programmable Function Keys
21-02-01 Trunk Group Routing for
Extensions
2 - 1236
Description/Comments
Assign Private Line to the Private
Line Access Map (refer to
Program 15-06 in this section).
Use option 5 for Incoming, option
7 for Both Ways and option 4 for
Outgoing. In all other Access
Maps, assign option 3 to the
Private Line.
Assign extension to have Private
Line to an unused Private Line
Access Map.
Make sure extension has a line
key (e.g., 012) for the Private Line.
Change the routing as needed.
UNIVERGE SV8100
Assigned Data
1
0 = No access
1 = Outgoing access
only
2 = Incoming access
only
3 = Access only when
trunk on Hold
4 = Outgoing access
and access when trunk
on Hold
5 = Incoming access
and access when trunk
on Hold
6 = Incoming and
Outgoing access
7 = Incoming access,
outgoing access and
access when trunk
on Hold
Trunk Access Maps:
1~200
Default:
Access Maps 1~200 =
Trunk Ports 1~200
assigned with option 7
access (incoming and
outgoing access and
access when trunk is
on Hold).
Trunks 1~200
(default = 1)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
1~100 (Trunk Groups)
0~100
(0 = No Setting)
(default = 1)
Private Line
Level
2 3



