Virtual Extensions - NEC Univerge SV8100 Features And Specifications Manual

Enhancements
With Version 3000 or higher system software, the appropriate line key page automatically
displays for incoming calls on the DTL-8LD-1 (DESI-Less) and ITL-320C-1 terminals.
Calls can be parked from a virtual extension (Version 3000 or higher software).
With Version 7000 or higher software:
A special ringtone is provided when a pre-assigned extension places an Intercom call.

Distinctive ringing on the Virtual Extension is supported which can distinguish between

external and internal calls.
With Version 8000 or higher software:
A virtual extension can now display the caller ID of an internal caller (Callers station name is

displayed, if station name is not available the extension number is displayed). Also, a virtual
extension can now display the caller ID of an internal or external caller when the virtual is not
set to ring (Previously the virtual extension must be set to ring or CID is not displayed).
The number of Tone Patterns has increased from four to eight.

Description
Virtual Extensions are available software extensions on the Basic and Expanded Port
Packages. A Virtual Extension assigned to a line key can appear and ring on an individual
station or multiple stations and be used for outbound access.
Virtual Extensions (VE) are shared with Call Arrival (CAR) Keys. In virtual extension mode,
the key acts as a secondary extension. Up to 256 CAR/VE keys are provided.
Conditions
There are 256 available ports/Extensions shared between CAR keys and Virtual

Extensions.
The 256 available ports/Extensions are assigned per extension for CAR key

mode or Virtual Extension key mode.
More than one extension can share a Virtual Extension key.

An extension can have more than one Virtual Extension key assigned.

 Assigning a Virtual Extension key of the extension the key is assigned on is not supported.

Virtual Extensions

Virtual Extensions
V
2 - 1773