NEC Univerge SV8100 Features And Specifications Manual page 1665

UNIVERGE SV8100
Program
Program Name
Number
15-07-01 Programmable Function Keys
20-02-02 System Options for Multiline
Telephones – Trunk Group
Access Key Operating Mode
20-29-01 Timer Class for Extension – Day/
Night Mode 1~8, Class Number
20-31-04 Timer Class Timer Assignment –
Intercom Interdigits Time
(Intercom I/D Timer)
21-01-02 System Options for Outgoing
Calls – Intercom Interdigit Time
21-01-05 System Options for Outgoing
Calls – Disconnect Time When
Dial Tone Not Detected
Trunk Groups
Description/Comments
Assign function keys for trunk
group access (code 02 + group)
or Call Appearance (CAP) Keys
(code 08 + CAP Key orbit
0001~9999 (or 0000 for auto
assign).
Set the operating mode of the
extension trunk group keys.
Assign the timer class to each
extension. There are 16 Classes
that can be assigned. You make
eight entries for this Program, one
for each Night Service Mode. This
entry includes virtual extension
numbers.
When placing Intercom calls,
extension users must dial each
digit in this time.
When placing Intercom calls,
extension users must dial each
digit in this time.
If 14-02-11 is enabled, the system
skips over a trunk if dial tone is not
detected. This option pertains to
calls placed using Speed Dial,
ARS, Last Number Redial or Save
Number dialed. It does not pertain
to line key or Direct Trunk Access
calls.
Assigned Data
1
Trunk Groups: 1~100
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
0 = Outgoing /
Incoming
1 = Outgoing
2 = Incoming
(default = 0)
0~15
0 = Not assigned
(default = 0)
0~64800 (seconds)
(default = 10)
0~64800 (seconds)
(default = 10)
0~64800 (seconds)
(default =3)
Issue 12.0
Level
2 3






2 - 1635