NEC Univerge SV8100 Features And Specifications Manual page 1406

Issue 12.0
Program
Program Name
Number
35-02-16 SMDR Output Options – Trunk
Name or Received Dialed
Number
35-02-17 SMDR Output Options – Print
Account Code or Caller Name of
Incoming Call
35-02-18 SMDR Output Options – Print
Mode for Caller Name of
Incoming Call
35-03-01 SMDR Port Assignment for
Trunk Group
35-04-01 SMDR Port Assignment for
Department Groups
2 - 1376
Description/Comments
Determine how the SMDR should
print incoming calls on ANI/DNIS
or DID trunks. If set to 1, ANI/DNIS
trunks can print DNIS digits. For
DID trunks, if the received number
is not defined in Program
22-11-01, a number is not printed.
If set to 0 trunk names are printed
instead (assigned in Program
14-01-01).
Determine whether the Account
Code or Caller ID name should
print in the SMDR record. Program
35-01-08 must be set to 0 for this
entry to be followed.
Select whether to display up to 16
characters of the Caller Name on
the same line as the call record (0)
or if a line feed should be added
and up to 24 characters of the
Caller Name are displayed on the
following line (1). If the line feed
option is selected, the Caller
Name is displayed on the next line
as : NEXT Caller Name.
This setting works regardless of
the setting in Program 35-02-15.

With this option set to 1, if
your communications
program (such as
HyperTerminal) has the line
wrap option enabled in the
ASCII setup, an additional
line break may appear above
the Caller name line.
Assign the SMDR port for each
trunk group. This is the SMDR port
to which the incoming call
information should be sent.
Assign the SMDR port for each
department group. This is the
SMDR port where the outgoing
call information should be sent.
UNIVERGE SV8100
Assigned Data
0 = Trunk Port Name
1 = Received Dialed
Number
2 = Both
(default = 0)
0 = ACC
1 = CNAME
(default = 0)
0 = Normal
1 = Line Feed
(default = 0)
Trunk Group: 1~100,
SMDR Port: 1~8
(default = 1)
Department Group:
01~64
SMDR Port: 1~8
(default = 1)
SMB8000 Communications Analyst
Level
1 2 3




