NEC Univerge SV8100 Features And Specifications Manual page 1649

UNIVERGE SV8100
Program
Program Name
Number
24-02-02 System Options for Transfer –
MOH or Ringback on Transferred
Calls
24-02-03 System Options for Transfer –
Delayed Call Forwarding Time
24-02-04 System Options for Transfer –
Transfer Recall Time
24-02-05 System Options for Transfer –
Message Wait Ring Interval Time
Transfer
Description/Comments
Enable (0)/Disable (1) MOH on
Transfer. If enabled, a transferred
caller hears Music on Hold while
their call rings the destination
extension. If disabled, a
transferred caller hears ringback
while their call rings the
destination extension. For this
option to work with voice mail, the
transferred call must be an
unscreened transfer.
If activated at an extension,
Delayed Call Forwarding occurs
after this time. This also sets the
time a Transferred call waits at an
extension forwarded to Voice Mail
before routing to the called
extension mailbox.
Set the Transfer Recall Time. An
unanswered transferred call
recalls to the extension that
initially transferred it after this time.
For Single Line Telephones
(SLTs) without message waiting
lamps, this is the time between
intermittent ringing. If this value is
0, the system rings once.

A release transfer to a busy
Department Group only
follows this time if the
Department Group is set to 0
= No Queue in Program
16-01-10, if set to 1, 2 or 3 it
follows the time in Program
24-02-04.
Assigned Data
1
0 = Hold Tone
1 = Ring Back Tone
(default = 0)
0~64800 (seconds)
(default = 10)
0~64800 (seconds)
(default = 30)
0~64800 (seconds)
(default = 30)
Issue 12.0
Level
2 3




2 - 1619