NEC Univerge SV8100 Features And Specifications Manual page 1000

Issue 12.0
60 Day Free License
The 60 Day Free License comes with the CD-CP00-US. It allows for all features (except Encryption
feature) to be active for 60 days. The count down starts on the first power on and ends at midnight of the
60th day.
By default, the 60 Day Free License is set to disabled (Version 3000 and higher software). The

60 day count down starts when the system is initially powered on and continues if the 60 Day Free
License is disabled or enabled.
The CD-CP00-US works for 1440 hours from the first time powered on.

The clock counts down only when the power supply in the chassis is ON – battery is not in effect.

If the CD-CP00-US is removed, or the system is powered OFF, the countdown stops.

Every time the clock is changed, the CD-CP00-US free license (60 days) loses one hour.

While the free license is active the user can increase the port size of the system to maximum by

using Program 90-55.
With Version 8000 and higher, the Encryption feature will only work if Encryption License (0030)

is installed.
Recovery License
The recovery license turns on all licenses for up to 30 days.
To request a recovery license, go to
portal and select the customer and the location of the CD-CP00-US. This can be done only once per
CD-CP00-US.
Conditions
The recovery license can be used only once for each UNIVERGE SV8100 CD-CP00-US.

When the recovery license is generated, it gives the date that the license ends (30 days

includes the day generated).
If the date is changed in Program 10-01-XX, while the license is in effect, to a date before

the generated date it subtracts one day from the recovery license.
If the date is changed in Program 10-01-XX, while the license is in effect, to a date after the

generated date, it runs until the End Date specified when the License was generated.
If the date is changed in Program 10-01-XX, while the license is in effect, to a date after the

End Date specified when the License was generated, the system resets when it is applied
(transfer key pressed), not when exiting program mode.
When the System time turns to midnight of the End Date, the system resets and comes

back with no licenses.
The recovery license can be activated only from PCPro or WebPro, not a multiline terminal.

2 - 970
http://eip.necunified.com/Default.aspx
UNIVERGE SV8100
and then go to the license
Licensing