NEC Univerge SV8100 Features And Specifications Manual page 994

Issue 12.0
2. To redial the last number, press
- OR -
Search for the desired number from the Redial List by pressing Redial or VOLUME  or VOLUME
 keys.
- OR -
Press the Left Cursor key once and the VOLUME  or VOLUME  keys to find number.
3. Lift the handset or press Speaker to place the call.

The system automatically selects a trunk from the same group as your original call and dials the last number
dialed.
- OR -
1. At the multiline terminal, press Speaker or lift the handset (optional).
 The system automatically selects a trunk from the same group as your original call.
2. Press Redial.
- OR -
At the single line telephone, lift the handset.
3. Dial
5.
#

The system automatically selects a trunk from the same group as your original call and dials the last number
dialed.
To check the number saved for Last Number Redial:
1. Press Redial or the Left Cursor key once.

The stored number displays for six seconds. The stored number dials out if you:
- Lift the handset.
- Press an idle line key.
- or -
- Press Speaker.
2. Press the Exit key.
To erase the stored number:
1. At the multiline terminal, press Speaker or lift handset.
- OR -
At the single line telephone, lift the handset.
2. Dial 776.
2 - 964
.
#
UNIVERGE SV8100
Last Number Redial