NEC Univerge SV8100 Features And Specifications Manual page 1246

Issue 12.0
Program
Program Name
Number
22-02-01 Incoming Call Trunk Setup
22-07-01 DIL Assignment
90-02-01 Programming Password Setup –
User Name
90-02-02 Programming Password Setup –
Password
2 - 1216
Description/Comments
Define the service type for the
trunk intended to access the
internal modem as 4:DIL.
Assign the Modem Access service
code set in Program 11-15-14 as
the destination extension for the
DIL trunk for modem access.
Set the system passwords.
Configure the administrator
accounts that are used when
connecting to the KTS via PCPro/
WebPro.
If using PCPro, these are the
accounts that are used to connect.
If using WebPro, these are the
accounts that are used to login.

If calls are answered by an
Auto attendant first, instead
of the DIL setup on Program
22-01 and Program 22-07,
set the transfer destination in
the Auto Attendant to the
Modem Access Service
Code.
UNIVERGE SV8100
Assigned Data
1
0 = Normal
1 = VRS (second dial
tone if no VRS
installed)
2 = DISA
3 = DID

4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Extension Number
(maximum eight digits)
(default not assigned)
Maximum 10
characters
Refer to the SV8100
Programming Manual
for default settings.
Up to eight digits.
Refer to the SV8100
Programming Manual
for default settings.
PC Programming
Level
2 3


