NEC Univerge SV8100 Features And Specifications Manual page 1041

UNIVERGE SV8100
Program
Program Name
Number
11-12-21 Service Code Setup (for Service
Access) – Meet-Me Answer to
Specified Internal Paging Group
11-12-22 Service Code Setup (for Service
Access) – Meet-Me Answer to
External Paging
11-12-23 Service Code Setup (for Service
Access) – Meet-Me Answer in
Same Paging Group
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
20-10-06 Class of Service Options
(Answer Service) – Meet-Me
Conference and Paging
31-02-01 Internal Paging Group
Assignment – Internal Paging
Group Number
31-02-02 Internal Paging Group
Assignment – Internal All Call
Paging Receiving
Meet Me Paging Transfer
Description/Comments
Customize the Service Codes
used for meet-me answer to
specified internal paging group
service access.
Customize the Service Codes
used for meet-me answer to
external paging service access.
Customize the Service Codes
used for meet-me answer in same
paging group service access.
Assign function keys for External
Zone Paging (code 19 + zone),
External All Call Paging (code 20),
Internal Zone Paging (code 21 +
zone) or Meet Me Conference/
Paging Pickup (code 23).
Assign a Class of Service (1~15)
to an extension.
Turn Off or On an extension user
ability to use Meet-Me Conference
and Paging.
Assign extensions to Internal
Paging Groups (i.e., Page Zones).
Allow/Prevent All Call Internal
Paging for each extension. If
allowed, extension can place and
receive All Call Internal Paging
announcements. If prevented,
extensions can make (not receive)
only All Call Internal Paging
announcements. If combined,
Paging zones should be restricted
as well, change the internal page
zone group in Program 31-07-01
to 0.
Assigned Data
1
MLT, SLT
(default = 764)
MLT, SLT
(default = 765)
MLT, SLT
(default = 763)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0~64
(0 = No Setting)
Default:
0 for IP Station
1 for TDM Station
0 = Prevent
1 = Allow
(default = 0)
Issue 12.0
Level
2 3







2 - 1011