NEC Univerge SV8100 Features And Specifications Manual page 1419

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
10-09-01 DTMF and Dial Tone Circuit
Setup
10-54-01 License Configuration for Each
Package – License Code
SMB8000 Conference Bridge
Description/Comments
Allocate the circuits on the
CD-CP00-US that has 32 circuits
initially for either DTMF receiving
or dial tone detection. When the
PS-BS10 is installed another 64
circuits are added. Extensions are
used for DTMF receivers for single
line telephones. Trunks are used
as DTMF receivers for dial tone
and busy tone detection for analog
trunks.
Assign at least one circuit for
DTMF reception ( 0 or 1). Use the
following as a guide when
allocating DTMF receivers:
In light traffic sites, allocate one

DTMF receiver for every 10
devices that use them.
In heavy traffic sites, allocate

one DTMF receiver for every
five devices that use them.
Assign licenses to the Conference
Application on a per slot basis. For
the slot the CD-PVAA blade is
installed in, assign the number of
licensed conference bridge ports.
The license feature code is 6000.

License assignment in
program 10-54-01 and
10-54-02 must be done
before the system recognizes
the CD-PVAA Blade.
Assigned Data
1
0 = Common Use
1 = Extension Only
2 = Trunk Only
Default:
Circuit/Resource
01~08 = 1 (Extensions)
Circuit/Resource
09~32 = 2 (Trunks)
Circuit/Resource
33~96 = 0 (Not Used)

Circuit/Resource
97~160 = 0 (Common)
When PZ-BS10 is
installed, 97~160 are
available
Refer to Program
10-50-01 in SV8100
Programming Manual.

Issue 12.0
Level
2 3
2 - 1389