NEC Univerge SV8100 Features And Specifications Manual page 1397

UNIVERGE SV8100
Program
Program Name
Number
20-14-05 Class of Service Options for
DISA/E&M – Operator Calling
20-14-06 Class of Service Options for
DISA/E&M – Internal Paging
20-14-07 Class of Service Options for
DISA/E&M – External Paging
20-14-08 Class of Service Options for
DISA/E&M – Direct Trunk Access
20-14-09 Class of Service Options for
DISA/E&M – Forced Trunk
Disconnect <Not for ISDN
T-point>
20-14-10 Class of Service Options for
DISA/E&M – Call Forward Setting
by Remote via DISA
20-14-11 Class of Service Options for
DISA/E&M – DISA/Tie Trunk
Barge-In
20-14-12 Class of Service Options for
DISA/E&M – Retrieve Park Hold
Operation
To originate internal calls:
1. Lift the handset, and wait for internal dial tone.
2. Dial the applicable internal number.
SLT Adapter
Description/Comments
Enable/Disable a DISA or tie trunk
caller ability to dial 0 for the
telephone system operator.
Enable/Disable a DISA or tie trunk
caller ability to use the telephone
system Internal Paging.
Enable/Disable a DISA or tie trunk
caller ability to use the telephone
system External Paging.
Enable/Disable a DISA or tie trunk
caller ability to use Direct Trunk
Access (Service Code 715).
Enable/Disable a tie trunk caller
ability to use Forced Trunk
Disconnect (Service Code 26).
This option is not available to
DISA callers.
Enable/Disable a DISA caller
ability to use the Call Forward
service codes (Program 11-11-01
through Program 11-11-05).
Enable/Disable a DISA or tie trunk
user ability to use Barge-In.
Turn Off or On the ability for a
DISA caller to retrieve parked or
held calls.
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 =Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Issue 12.0
Level
2 3








2 - 1367