Table 2-46 Sip Invite Header Fields - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Program
Program Name
Number
44-05-01 ARS/F-Route Table – Trunk
Group Number
44-05-09 ARS/F-Route Table – Maximum
Digit
84-26-01 IPL Basic Setup – IP Address
Operation
SIP Trunk E.164 Support:
To make a call using E.164 number format:
1. Lift the handset or press Speaker.
2. Dial 00441202223344

The system automatically modifies the required header fields of the SIP INVITE message using the configuration
settings in the table below before forwarding to the ITSP.
Program Program
84-14-13 10-02-01
0 44
No Setting
IP Trunk – (SIP) Session Initiation Protocol
Assign the Trunk Group to be used
by the F-Route Table.

Input the maximum number of
digits to send when using the
F-Route.
Assign the IP address for each
DSP on the IPLB.
.
#

Table 2-46 SIP INVITE Header Fields

Program
10-02-02
– Request-URI: Invite sip: 00441202223344@172.16.18.100 SIP/2.0
To header: To:sip:00441202223344@172.16.18.100
From header: From<sip:441509555123@172.16.0.10>
– Request-URI: Invite sip: 00441202223344@172.16.18.100 SIP/2.0
To header: To:sip:00441202223344@172.16.18.100
From header: From<sip:441509555123@172.16.0.10>
Description/Comments
This is the Trunk Group
assigned to the SIP System
Interconnection trunks in
Program 14-05-01.
Description
Calling Party Number = 441509555123
Called Party Number = 00441202223344
Assigned Data
1
0~100, 255
0 = No Setting
255 = Extension Call

(default = 0)
0~24
(default = 0)
xxx.xxx.xxx.xxx
Defaults:
Slot 1 = 172.16.0.20
:
Slot 4 = 172.16.0.44
VoIP GW Number 1~8
172.16.0.20 ~
172.16.16.0.27
Issue 12.0
Level
2 3


2 - 861