NEC Univerge SV8100 Features And Specifications Manual page 1821

UNIVERGE SV8100
If the active greeting has not been recorded, a caller leaving a message in the subscriber mailbox hears,
"At the tone, you can leave your message for (extension number or name)."
Refer to the VM8000 InMail System Guide for complete details on setting these features.
VM8000 InMail: Message Playback Options
The following functions are available:
Auto Play

If Auto Play is enabled, New Messages play automatically when an extension user accesses their
Mailbox without having to dial 5.
Change Playback Order

Playback Order (FIFO: Playback from received call order and LIFO: Playback from New Messages
First) can be set by UserPro or mailbox setup.
Ability to mark message as New

The user can mark a message as "New" after playback of the message is complete.
Conditions
When the VM8000 InMail CF and PZ-VM21 are installed, the system provides two VRS

ports (VRS license not required).
Once Live Record is started, dialed DTMF digits are no longer sent to the outside system

for the duration of that call.
Remote CCIS extensions are not supported in a centralized directory.

When set for Unscreened Transfer, calls from the InMail ring at the extension like other

transferred calls and display the incoming Caller ID data (if provided by Telco and enabled
in programming) while the phone is ringing.
When set for Screened Transfers, calls from the InMail ring like Intercom calls but do not

display incoming Caller ID data (if provided by Telco and enabled in programming) until
after the call is answered.
When creating a distribution list, do not use blank destinations within the list. The system

considers blank entries to be the end of the list and does not use entries following the
blank.
When using Version 4000 or lower software, InMail is not supported for centralized voice

mail in a KTS to KTS CCIS network.
When using Version 5000 or higher software, InMail is supported for centralized voice

mail in a KTS to KTS CCIS network.
When more than eight ports are to be enabled, the PZ-ME50-US is required.

VM8000 InMail
Issue 12.0
2 - 1791