Figure 2-24 Multiple Sv8100 To Ipk/Ipk Ii Connection (Layout 1) - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Multiple SV8100 to IPK/IPK II Chassis Connectivity
In addition to the cabinet/chassis layout shown above, with Version 4000 (4.01) or higher
software the following configurations are also supported:
Layout 1: Refer to
cable is connected to the MGN-U10 ETU (Migration Board) and two cables are connected
to the (PZ-BS11).
Slot Layout:
Slot 1 ~ 6: 1st SV8100 chassis slots 1 ~ 6

Slot 7 ~ 11: 1st IPK II cabinet slots 1 ~ 5

Slot 13 ~ 24: 2nd and 3rd SV8100 chassis slots, 1 ~ 6 each


Slot 12 is used for B channel highway and cannot support the hardware.
IPK/IPK II Migration
Figure 2-24 Multiple SV8100 to IPK/IPK II Connection (Layout

Figure 2-24 Multiple SV8100 to IPK/IPK II Connection (Layout 1)

Issue 12.0
1). One
2 - 879