NEC Univerge SV8100 Features And Specifications Manual page 1357

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-11-14 Service Code Setup (for Setup/
Entry Operation) – Text Message
Setting
15-07-01 Programmable Function Keys
20-01-02 System Options – Text Message
Mode
Selectable Display Messaging
Description/Comments
Define the service code used
when setting a text message.
Assign a function key for Text
Message (code 18). The Text
Message key automatically selects
the message used when
programming the key.
Select whether an intercom caller
should hear busy (1) or ring
through (0) for extensions which
have Selectable Display
Messaging set.

Any extension previously set
with Selectable Display
Messaging must cancel the
feature and reactivate for a
change in this option to take
affect.
Assigned Data
1
MLT

(default not assigned)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
0 = Call mode
1 = No Answer/
Busy mode
(default = 1)
Issue 12.0
Level
2 3

2 - 1327