NEC Univerge SV8100 Features And Specifications Manual page 1309

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
20-06-01 Class of Service for Extensions
20-08-01 Class of Service Options
(Outgoing Call Service) –
Intercom Calls
20-08-09 Class of Service Options
(Outgoing Call Service) –
Hotline/Extension Ringdown
21-01-09 System Options for Outgoing
Calls – Ringdown Extension
Timer (Hotline Start)
Ringdown Extension, Internal/External
Description/Comments
Assign a Class of Service (1~15)
to an extension.
Turn Off or On Intercom calling for
the extension.
Turn Off or On Hotline
(Ringdown). If disabled in Class of
Service, the settings in Program
21-11 below have no effect.
After the user lifts the handset, the
extension automatically calls the
ringdown destination after this
time. A setting of 0 immediately
rings the programmed extension.
Any other setting delays the
ringdown the number of seconds
programmed.
Assigned Data
1
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On

(default = 1 for
COS 1~15)
0 = Off
1 = On

(default = 0 for
COS 1~15)
0~64800 seconds
(default = 5)

Issue 12.0
Level
2 3
2 - 1279