NEC Univerge SV8100 Features And Specifications Manual page 1531

UNIVERGE SV8100
Program
Program Name
Number
51-03-01 NetLink Internet Protocol
Address List Setting – Internet
Protocol Address List
51-04-01 IP Address Setting of Top
Priority Primary System of
Net-Link – Internet Protocol
Address of Top Priority Primary
51-05-01 NetLink Timer Settings – Keep
Alive Sending Interval
51-05-02 NetLink Timer Settings – Keep
Alive Response Waiting Time
51-05-03 NetLink Timer Settings – Primary
Search Packet Sending Interval
51-05-04 NetLink Timer Settings – Primary
Search Time Maximum Value
51-05-05 NetLink Timer Settings – Top
Priority Primary Detection
Packet Sending Interval
51-05-06 NetLink Timer Settings – Primary
Compulsion Specification Trial
Maximum Time
SV8100 NetLink
Description/Comments
The system seeks the Primary
system based on this list.
When there is no Primary system
yet, or Fail Over occurs, Node List
is referred to establish new link.
This setting is necessary when
Program 51-01-03 is 0, or
Program 51-05-02 is other than 0.
Once the system connects to the
Primary System, this setting is
updated by the Primary system
when Program 51-13-01 is On.
So, enter IP address of the
systems which may become
Primary at least.
Enter the IP address of the Top
Priority Primary System.
To use this feature, set Program
51-06-01 to 1(On).
This is the Keep Alive sending
time from the Secondary system
to confirm communication with the
Primary system.
This is the time the Secondary
system waits for a response from
the Primary system before cutting
off communication.
While searching the Primary
system, the system sends a
packet at this time.
Total time of Primary system seek
time.
When current Primary system is
not Top Priority Primary System,
the system sends packet to check
if Top Priority System exists.
When the forced change Primary
command is executed, the system
searches the new Primary system
for this time.
Assigned Data
1
0.0.0.0~
126.255.255.254
128.0.0.1~
191.255.255.254
192.0.0.1~
223.255.255.254
(default = 0.0.0.0)

0.0.0.0~
126.255.255.254
128.0.0.1~

191.255.255.254
192.0.0.1~
223.255.255.254
(default = 0.0.0.0)
1~3600 (seconds)
(default = 5)
0, 5~10800 (seconds)
(0 = infinity)
(default =20)
1~3600 (seconds)
(default = 5)
5~10800 (seconds)
(default = 20)
1~3600 (seconds)
(default = 10)
1~10800 (seconds)
(default = 30)
Issue 12.0
Level
2 3






2 - 1501