NEC Univerge SV8100 Features And Specifications Manual page 1744

Hide thumbs Also See for Univerge SV8100:

Table of Contents

Parameter Name

HO_Cell_AutoAnswer_CLID

MWI_Out_Of_Dialog_From_CM

CM_Side_DTMF

Reserve_User_Pool

Multiple_Transport_Supported

Cell_Vm_Direct_Answer_Timeout

Long_Distance_Prefix

DTMF_Info_Support

Outgoing_Prefix

Handoff_Prefix

Required Data Assignment

This filed should have all possible outgoing trunk Caller ID for the uMC

Server port. This information is provided to the uMobility client device

so it knows when an incoming call is from the uMC Server. Refer to the

uMC Server System Administrator's Guide for information on how to

enter number ranges.

Use the appropriate setting below:

For Analog lines = Blank

For ISDN lines = 3

Warning: If this field is set to TRUE the uMC Server will not be able to

make outgoing CO calls.

Used by the uMobility server to make calls to client devices in the Cell

Domain. Should be set to the trunk access code used to dial out. This

is normally the same as the Handoff_Prefix setting. On a default

system this should be set to 9.

Used by the uMobility server when handing a call off from the WiFi to

the Cell Domain. Should be set to the trunk access code used to dial

out. This is normally the same as the Outgoing_Prefix setting. On a

default system this should be set to 9.

UNIVERGE SV8100

uMobility – Server Based

Show Quick Links

Table of Contents