NEC Univerge SV8100 Features And Specifications Manual page 1755

UNIVERGE SV8100
Program
Program Name
Number
11-12-29 Service Code Setup (for Service
Access) – Direct Extension Call
Pickup
14-02-23 Analog Trunk Data Setup –
Caller ID Receiving Method
15-05-04 IP Telephone Terminal Basic
Data Setup – Nickname
15-05-16 IP Telephone Terminal Basic
Data Setup – Authentication
Password
24-02-03 System Options for Transfer –
Delayed Call Forwarding Time
uMobility – Wi-Fi Client
Description/Comments
Customize the Service Codes for
direct extension call pickup.
For the Direct Call Pickup feature
to work on all mobile devices the
access code in Program 11-12-29
must be changed from ** to an all
number access code, for example
758.
Rings extension before receiving
Caller ID (1) or after receiving
Caller ID (0).
If Caller ID is received on a trunk
that is in the same ring group as a
uMobility client device this
should be set to 0 (Wait Caller ID).
Assign nick name to all system
phones. This is the name
displayed on internal calls to a
uMobility client device.
Assign the authentication
password for SIP single line
telephones.
If using authentication for the
uMobility Client devices the
password should be entered here.
Set the Delayed Call Forwarding
interval. For an unanswered call,
Call Forward No Answer occurs
after this interval.
Set Call Forward No Answer time
to 30 seconds or more for
uMobility phones. This will give
them time to ring when they are in
the cellular domain.
Assigned Data
1
MLT, SLT
(default =  )
0 = Wait Caller ID
1 = Immediate Ring
(default = 1)
Station Name
(default not assigned)
Up to 24 characters
(default not assigned)
0~64800 (seconds)
(default = 10)

Issue 12.0
Level
2 3




2 - 1725