NEC Univerge SV8100 Features And Specifications Manual page 873

UNIVERGE SV8100
Program
Program Name
Number
10-28-05 SIP System Information Setup –
Domain Assignment
10-28-06 SIP System Information Setup –
IP Trunk Port Binding
10-29-01 SIP Server Information Setup –
Default Proxy (Outbound)
10-29-02 SIP Server Information Setup –
Default Proxy (Inbound)
10-29-03 SIP Server Information Setup –
Default Proxy IP Address
10-29-04 SIP Server Information Setup –
Default Proxy Port Number
10-29-05 SIP Server Information Setup –
Registrar Mode
IP Trunk – (SIP) Session Initiation Protocol
Description/Comments
Define the Domain Assignment.
This entry is determined by what
information the SIP carrier
provides. If the SIP carrier
provides a server name:
SIPconnect-sca@L0.cbeyond.net,
then the domain is:
L0.cbeyond.net and the host name
is SIPconnect-sca.
Enable/Disable IP Trunk Port
binding.
Define the SIP Proxy setup,
Default Proxy (Outbound). When
SIP trunking is used, this must be
on.

If entries are made in
Program 10-29-xx for an SIP
Server and the SIP Server is
removed or not used, the
entries in Program 10-29-xx
must be set back to their
default settings. Even if
Program 10-29-01 is set to 0
(off), the UNIVERGE SV8100
still checks the settings in the
remaining 10-29 programs.
Define the Default Proxy
(Inbound).
Enter the default Proxy IP Address
if the SIP carrier is using an IP
address for the proxy. In most
cases, this is left at the default
entry as the domain name is used.
Define the Proxy Port Number.
Define the Registrar Mode. This
should always be set to manual
when using SIP trunking.
Assigned Data
1
0 = IP Address
1 = Domain Name
(default = 0)

0 = Disable

1 = Enable
(default = 0)
0 = Off
1 = On
(default = 0)

0 = Off

1 = On
(default = 0)
0.0.0.0~
126.255.255.254
128.0.0.1~

191.255.255.254
192.0.0.1~
223.255.255.254
(default = 0.0.0.0)
0~65535

(default = 5060)
0 = None

1 = Manual
(default = 0)
Issue 12.0
Level
2 3
2 - 843